Travertine Tiled Floor Cleaned, Polished and Filled in Priorslee

This Travertine tiled floor was installed in the Kitchen, Hallway and downstairs WC at a property in the Telford suburb of Priorslee. It has been some time since it was last sealed and the sealer had now worn-down allowing dirt to become ingrained in the stone, as a result the floor now looked flat and un-interesting. The floor also had several holes that were trapping dirt and needed filling.

Travertine Floor Before Polishing in Priorslee Telford

I surveyed the floor and recommended a process called burnishing which uses a series of abrasive pads to restore the polished appearance of the stone. Once done the floor would be sealed to protect it from dirt and staining going forward. The owner agreed my quote and we set a date for my return to restore the appearance of the floor.

Travertine Floor Before Polishing in Priorslee Telford Travertine Floor Before Polishing in Priorslee Telford

Cleaning Travertine Floor Tile and Grout

Before starting the cleaning process, I spent time protecting the woodwork and removing the kickboards from underneath the kitchen units.
Then working in sections I gave the floor a general wash to remove any grit and clean the grout. Focusing primarily on the grout I applied a medium dilution Tile Doctor Pro-Clean and left it to soak in. The solution was left to dwell for roughly ten minutes in order for it to digest the dirt and remaining sealer. I then used a deck brush on the tiles and a stiff grout brush along the grout lines to scrub the solution in and release the dirty. The floor was then rinsed with water and the now soiled cleaning solution was removed using a wet vacuum.

The next step was to burnish the stone using a set of diamond encrusted pads which are applied to the floor using a rotary floor buffer in sequence from coarse to super fine. First using the 400-grit coarse number 1 pad we put some clean water on the floor and using our rotary machine slowly burnished the area making sure that we passed over each tile 4 times, this coarse pad cuts into the surface grime of the floor and also removes sealers. The resultant soiled water is rinsed away with clean water which in turn is removed using a wet vacuum. This process is then repeated with the 800-grit medium and 1500-grit fine pads, rinsing between each pad until a nice polish is built up on the tile. The floor is then given a final rinse and once we were satisfied that all the slurry had been removed.

Last job for the evening was to inspect the floor and fill the small holes using grout in a colour that matched that of the Travertine. The floor was then left to dry off overnight.

Polishing and Sealing Travertine Floor Tiles

On day two I continued the burnishing process by applying the very fine 3000 grit pad. This last pad is applied dry with only a small amount of water which is sprayed onto the floor and further builds on the polished appearance of the Travertine. This also has the advantage of leaving the floor completely dry and ready for sealing.

Travertine Floor After Polishing in Priorslee Telford Travertine Floor After Polishing in Priorslee Telford

We have several sealers that we recommend for use on Travertine and for this situation I applied two coats of Tile Doctor Colour Grow which is an impregnating sealer that occupies the pores in the stone thus preventing dirt from becoming ingrained there. Colour Grow as its name suggests enhances the colours in the stone and when applied to Travertine it does a good job of enhancing the natural brown colours in the stone. My client was certainly impressed with the improvement and was over the moon with when they saw the result.

Travertine Floor After Polishing in Priorslee Telford

 

Travertine Floor Professionally Polished in Shropshire

Marble Tiled Floor Restoration in Albrighton

For this job I travelled to the town of Albrighton, which is actually the most easterly settlement in the whole of Shropshire. My client had an issue with their Marble tiled floor which was installed in the kitchen and hallway. They had dropped and broke a bottle of vinegar in the kitchen, and the substance unfortunately came in contact with the tiles. Since Marble is highly sensitive to acid, the vinegar (an acetic acid) had basically etched the surface of the tiles make it impossible clean chemically.

Marble tiled floor before restoration in Albrighton

Although the tiles were a nice, expensive Marble, the person who had first installed them had done a poor job, leaving lippage of up to 5mm in some areas, which would make work trickier. Undeterred I could see it would be possible to restore the floor using a combination of burnishing for the tiles and cleaning with a high alkaline product for the grout lines. I demonstrated this to my client on one tile which went well and I was then given the go ahead to restore the entire floor.

Marble tiled floor before restoration in Albrighton

Cleaning and burnishing acid damaged Marble tiles

My first task focused on cleaning the grout lines using a solution of Tile Doctor Pro-Clean worked in with a stiff grout brush. Pro-Clean is a high alkaline cleaner suitable for use on most types of natural stone floor. It helped to alleviate most of the grout staining caused by the vinegar, whilst also lifting out any ingrained dirt and muck, and this left the grout looking a lot cleaner.

After cleaning the grout lines I was able to move on to burnishing the tiles. As previously mentioned, no chemical product would be able to have an effect on the damaged tiles, so I resolved to burnish them using a system of four diamond encrusted burnishing pads fitted to a rotary machine. Working first with a coarse burnishing pad, and moving through to medium, fine and very fine pads, lubricated with a little water, I was able to significantly reduce the appearance of the acid stains, while also giving the tiles a nice polished finish.

Sealing a Marble tiled floor

Following the cleaning and burnishing processes I gave the tiles a good rinse to remove any remaining residue and then ensured the floor was completely dry before starting on the sealing.

To seal the floor and maximise the appearance I used Tile Doctor Colour Grow and Tile Doctor Shine powder. Colour Grow is an impregnating sealer that seeps into the pores of the stone intensifying and enhancing the natural shades and colours in the stone whilst also providing stain protection;
Shine Powder on the other hand is a crystallising powder that is ground directly into the tiles to provide a high shine finish and durable surface protection.

Marble tiled floor after restoration in Albrighton

My client and her husband were really happy with the results and left the following message on the Tile Doctor Feedback system:

“Jozsef was a charming young man in every respect, who worked very hard and achieved an amazing result. The tiles look better than the day they were laid. We are absolutely delighted with the work he has done and will recommend him to all our acquaintances. Thank you, Jozsef!”

Marble tiled floor after restoration in Albrighton

 
 

Putting new life into an acid etched Marble tiled kitchen floor in Shropshire

Victorian Tiled Hallway Renovated in Telford

Details below of a customer in Telford who bought a house with a Victorian Tiled Hallway a couple of years prior and has been refurbishing it in sections. When I went there to do the quotation the floor I could see it was in a desperate state and in need of a deep clean and replacement of several broken and cracked tiles, there were several loose ones too.

Victorian tiled Hallway before restoration in Telford Victorian tiled Hallway before restoration in Telford

Cleaning and Repairing a Victorian Tiled Floor

The floor was cleaned using a medium dilution of Tile Doctor Pro-Clean which was left to soak into the tiles for around 15 minutes before being worked into the tile and grout using a rotary machine fitted with a black scrubbing pad and a stiff grout brush. Pro-Clean is a strong alkaline cleaning product that is safe to use on Stone, Tile and Grout. The floor was given a thorough rinse with clean water and a wet vacuum was used to remove the water from the floor, stubborn areas were then spot cleaned using the same process and the floor was then left to dry off overnight.

Victorian tiled Hallway after repair and cleaning in Telford Victorian tiled Hallway after repair and cleaning in Telford

The next day I returned to do the repair work, originally there were seven tiles to replace, but I ended up replacing sixteen tiles and fixing twenty five, fortunately Victorian tiles are still popular and you can still source replacements.

Victorian tiled Hallway after repair and cleaning in Telford Victorian tiled Hallway after repair and cleaning in Telford

Sealing a Quarry Floor Sealing

To ensure the repaired areas had sufficient tile for the adhesive and grout to set I left the floor for four days before returning to apply a sealer checking the moisture level first to ensure it was dry enough to take the sealer. To seal the tiles which will help protect them from staining I applied five coats of Tile Doctor Seal and Go which works really well on Victorian tiles and adds a nice subtle shine to the floor also being water based you don’t get that smell that a solvent based sealer has.

Victorian tiled Hallway after restoration in Telford Victorian tiled Hallway after restoration in Telford

 
 

Restoring Victorian tiles in Shropshire

Travertine Tiled Floor Refurbished in Telford

This property in Telford had been purchased six months earlier with a view to refurbishing it and had recently started to get it back in shape. The history of the Travertine tiled floor was unknown but there was evidence of the wrong kind of maintenance as the legs of the kitchen cabinet was blown by excess moisture. The new owner did mention that the previous owner had three teenage children and I suspect keeping the floor maintained properly was probably not a priority.

Travertine Tile Cleaning Telford Before Travertine Tile Cleaning Telford Before

Cleaning Travertine Tiles

The first step was to give the floor a general wash to remove any grit and the grout clean so we started by applying a mild dilution of Tile Doctor Pro-Clean which was spread over the floor with particular attention paid to getting the solution into the grout lines. The solution was left to dwell for 10 minutes in order for it to soak in and eat through any dirt and existing sealer; we then used a stiff grout brush to scrub each and every grout line. Next we removed any trace of product by using a wet vacuum and rinsing thoroughly with clean water.

The next step was to use our diamond encrusted burnishing pads which attach to a rotary machine and burnish the floor with four different grits from coarse to super fine. First using course pad number 1 we put some clean water on the floor and using our rotary machine slowly burnished the area making sure that we passed over each tile 4 times, this coarse pad cuts into the surface grime of the floor and also removes sealers. The resultant soiled water is rinsed away with clean water which in turn is removed using a wet vacuum. This process is then repeated with the remaining pads, rinsing between each pad until a nice polish is built up on the tile. The floor is then given a final rinse and once we were satisfied that all the slurry had been removed we left the floor to dry overnight.

Cleaning Travertine and Limestone Tiles

When I returned the floor was tested using a damp meter to make sure the Travertine had dried sufficiently for sealing. It had so I started to seal it using a single coat of Tile Doctor Colour Grow which is an impregnating sealer that will occupy the pores in the stone to prevent other contaminates getting in there, Colour Grow also brings out the colours in the stone.

Travertine Tile Cleaning Telford After Travertine Tile Cleaning Telford After

It’s tricky to capture all of this with photographs although you should be able to see the shine now the polish has been restored, the main thing is the customer was very happy with the results and was kind enough to leave the following message.

“We moved into a house with very unloved travertine tiles in the kitchen, bathroom and WC. We were really impressed with Jozsef. He was friendly, knowledgeable and conscientious. He was up front with us about what could be achieved with the tiles and we are very pleased with the results. He worked efficiently, was tidy, prompt and mindful of our very young children. We would definitely recommend Jozsef.”

Travertine Tiled Floor Burnished and Sealed in Shropshire

Victorian Quarry Tiled Floor Restored in Telford

The photographs below of a Red and Black Victorian Quarry tiled floor were taken at a 109 year old cottage in the town of Telford. Unfortunately the tiles were in a really neglected state after the completion of building works but we do like a challenge and agreed to do the work.

Victorian Quarry Tiles Telford before cleaning Victorian Quarry Tiles Telford before cleaning

Cleaning a Quarry Tiled Floor

The whole floor was covered in layers of mortar and plaster so a strong solution of Tile Doctor Remove and Go was applied and scrubbed into the floor using a rotary machine fitted with a black scrubbing pad.

The initial clean revealed a lot more of the mess that had been left over from the builders mixing of mortar and concrete so I decided to try an acid based product called Tile Doctor Grout Clean-Up which is mainly used for the removal of grout from the tile surface but works on other cementitious materials as well. This worked well but required several applications to remove it all and once complete the floor was given a thorough rinse with clean water to ensure it was clear of the resultant slurry and there was no trace of cleaning product. A wet vacuum was used to remove the water from the floor and get it dry so it could be sealed.

Sealing a Quarry Floor Sealing

Once the floor was dry I sealed it using two coats of Tile Doctor Colour Grow which was chosen as the customer wanted a matt finish; Colour Grow also brings out the colours in the tile and it’s an impregnating sealer that occupies the pores in the tile to provide excellent stain protection.

I think you will agree the photographs below shows an amazing transformation that exceeded all expectations.

Victorian Quarry Tiles Telford After cleaning Victorian Quarry Tiles Telford After cleaning

 
 

Restoring old Quarry tiles in Shropshire